banner
Site Feedback  |  Login  |  Terms of Use  |  Search:
Story/Technical Portrait Image

Outboard Trailer Mount   Total Page Hits: 1295

Post Type: Technical/Project

Boat Part: Trailer

Date Modified: 07/03/2020 09:13 AM

Details

I made a mount on the trailer mast crutch to mount the outboard while trailering. It performed well on it's first trip of about a 2 hour drive on the interstate. It is made from 2x treated lumber and features inner cleats to keep the assembly from rotating on the crutch. Galvanized carriage bolts sandwich the two outer piece and essentially clamp around the crutch. The bolts go through the cleats. The cleats are also glued to the outer boards. The outboard is a 4HP Tohatsu 4-cycle.

Photos

Post Image
Post Image
Post Image